Connecting Additional Equipment - Sony FD Trinitron WEGA KV-20FA210 Operating Instructions Manual

Operating instructions
Connecting Additional Equipment
Connecting a TV and VCR
Rear of TV
VCR
cable/antenna
Optional connection
1
2
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
Cl If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Cl For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Usingyour TV with this connection
This coralection allows you to do the following:
Cl Program your Sony remote control to operate your VCR (see page 5).
Cl To activate your remote, press _Z_ to operate your VCR. To do this, first program your
I remote control, then use the Charmel Fix feature to set your TV to channel 3 or 4 (see page 28).
Cl Press CZ) repeatedly to switch between VCR input (VIDEO input) and VHF/UHF
(local channels).
12