Sony KV-PG14 Operating Instructions Manual
Fd trinitron wega color tv
Hide thumbs
Also See for KV-PG14:
- Operating instructions manual (14 pages) ,
- Operating instructions manual (14 pages)
Related Manuals for Sony KV-PG14
Summary of Contents for Sony KV-PG14
- Page 1 Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-TG21 KV-PG14 © 2001 Sony Corporation 4-084-117-13(1)
-
Page 2: Getting Started
Getting Started SELECT PROGR SELECT Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Securing The Tv
WARNING (continued) Do not place any objects on the TV. Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV. -
Page 5: Tv Front And Rear Panels
Bilingual indicator. (KV-PG14M72 only) Wake Up indicator. Select program number. Adjust volume. Select TV or video input. Select the desired item. Headphone terminal. (KV-TG21 only) Earphone terminal. (KV-PG14 only) Video input terminal. Antenna input terminal. Monitor output terminal. L(MONO) PROGR... -
Page 6: Connecting Optional Components
Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) TV rear panel L(MONO) Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time;... -
Page 7: Troubleshooting
TV. • Count the number of times the 1 (standby) indicator flashes. Press ! The 1 (standby) (main power) to turn off your TV. Contact your nearest Sony service indicator on your TV center. -
Page 8: Specifications
Specifications Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM,NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual B/G, I, D/K; A2 Stereo/ Bilingual B/G Channel coverage VHF : E2 to E12... -
Page 9: Remote Control
Remote control JUMP SOUND PROGR MODE FAVORITE Button JUMP PROGR +/– 2 +/– SELECT PIC MODE +/– 0 – 9, ÷ Timer operations Sound mode operations (KV-TG21M90 only) SOUND MODE Stereo/bilingual operations Teletext operations (green label) (red, green, yellow, blue) FAVORITE Function Turn off temporarily or... -
Page 10: Setting The Timers
Setting the timers You can turn on and off your TV by using the JUMP SOUND PROGR MODE FAVORITE Notes • You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power. • If no buttons or controls are pressed for more than two hours after the TV is turned on using the Wake Up timer, the TV automatically goes into standby mode. -
Page 11: Presetting Channels
Presetting channels You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. Number buttons JUMP SOUND PROGR MODE + or – FAVORITE PIC MODE SELECT PROGR +/–... - Page 12 Presetting channels (continued) To change the TV system setting If the picture or sound is abnormal when receiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears on the screen. (2) Press + or – to select the appropriate TV system until the picture or sound quality is optimal.
-
Page 13: Customizing The Picture And Sound
Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. JUMP SOUND PROGR SOUND MODE MODE SELECT + or – FAVORITE PIC MODE Adjusting the picture and sound settings Press SELECT until the desired setting appears. -
Page 14: Adjusting The Picture Position
Adjusting the picture position KV-TG21M90 only If the picture is slanting, you can adjust the picture position using the “PIC ROTATION” function until it is optimal. + or – FAVORITE SELECT Note • To reduce the slanting picture, keep external speakers or other electrical equipment away from the TV. -
Page 15: Enjoying Stereo Or Bilingual Programs
Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. JUMP SOUND PROGR MODE FAVORITE Notes • If the sound is distorted when receiving a monaural program through the 8 (antenna) terminal, press A/B repeatedly until “MONO”...