Installing The Tv - Sony SU-PT3M Manual

Installing the TV

1
Place the TV on the Table-Top
Stand.
Be sure to insert the dowels on the Table-Top
Stand into the slots of the TV.
Woofer speaker connector
TV base
Note
Do not hold the transparent part locating at the lower
part of the TV, otherwise your hands may be pinched
when installing the TV on the stand.
6
TV front
Woofer speaker connector
Slots
2
Secure the TV.
1 Insert the anchor attachments in the second
screw holes from the top on the left and right
pillars of the rear panel and tighten them to
secure the TV at the center of its rear.
2 Insert four TV securing screws in the
elongate holes on the lower part of the both
pillars of the rear panel and tighten them to
secure the TV at the lower part of its rear.
Notes
• Be sure to secure the anchor attachments first, as it
will be easier to align the TV securing screws with
their screw holes.
• When using an electric screwdriver, set the torque
setting to about 1.5 N·m.
3
Connect the mains lead and the
connecting cables to the TV.
z Tip
For details on connecting the mains lead and the
connecting cables, refer to the instruction manual of
the Plasma TV (KDE-W50A10).
Mains lead
1
Anchor attachment
2
TV securing screw
Connecting
cable