Adding The Sub To Sonos - Sonos SUB Product Manual

4
AC power (mains) input

Adding the SUB to Sonos

You can easily add the Sonos SUB to an existing Sonos system.
• You can pair the SUB with any amplified Sonos player, including a PLAYBAR, CONNECT:AMP, PLAY:1,
PLAY:3, PLAY:5, or ZP100. You cannot associate it with an un-amplified Sonos player such as the
CONNECT or ZP80.
• The SUB is compatible with Sonos software versions 3.8 and later. Be sure to check for software
updates before adding the SUB to Sonos.
Carefully unpack the package contents.
1.
Caution: Subwoofers are heavy. Exercise caution when unpacking your Sonos
SUB. Use the acoustic slot as a handle to lift the SUB out of the box. (You should
always bend your knees when lifting heavy objects to avoid undue stress on your
back.)
Choose a location for the SUB. It is designed to provide optimal sound wherever you place it.
2.
• You can position the SUB either vertically or horizontally. If you are going to use the SUB horizontally on
a smooth floor, you can attach the 4 permanent felt feet (included with your SUB) to each of the corners.
See Attaching the feet for horizontal placement for more information.
Use only the supplied power cord to connect to a power outlet (using a
third party power cord will void your warranty). Be sure to use the
proper power adapter for your country. Push the power cord firmly into
the SUB until it is flush with the surface.
Make sure at least one side of the
rectangular opening (acoustic slot) is
unobstructed.
• If you place the SUB vertically
flush against a wall, do not block
the front acoustic slot.
• If you place the SUB horizontally
on the floor, don't put anything on
top of it. Leave at least 1"
clearance along the top of the
SUB if placing under furniture.
Product Guide