Maintenance Tasks - Kärcher HDS 995 MX Eco Manual

Operating Instructions
Maintenance intervals
Once a week
— Clean strainer in water connection
— Clean the fine filter
— Check oil level
Immediately consult the Kärcher service
station when oil turns milky!
Once a month
— Clean strainer in low water protection
— Clean filter at cleaning-agent suction
hose
After 500 hours of operation, at least
once a year
— Change oil

Maintenance tasks

Engine/electronics indicator
lamp (item 28) is lit
— This warning lamp lights up when certain
maintenance work is necessary due to
accumulated operating hours.
! When you open the cover (item 8) of
the compartment (item 6) the electronic
display is visible in the window (item 4).
! When the necessary maintenance work
has been completed you should depress
the RESET button next to the display for
at least 7 seconds until the warning lamp
goes out.
Display
Necessary maintenance work
! Visual inspection
! Check that the high-pressure
connections do not leak
! Clean the fuel tank and the filter
Display
Necessary maintenance work
! Check that the pump does not leak
! Change the pump's oil
! Clean strainer in water connection
! Clean the strainer (coarse) fitted in front
of the low water protection
Display
Necessary maintenance work
! Decarbonise the heating coil *
! Descale the heating coil *
! Clean/replace the ignition electrodes *
! Cleaning/replacing the burner nozzle *
! Adjust the burner *
Display
Necessary maintenance work
! Check the overflow valve for leaks *
! Check the high-pressure hose *
! Clean the handgun
! Check the pulsation damper *
* This maintenance work should be
performed only by after-sales service.
English
31