Intended Use - Kärcher HDS 995 MX Eco Manual

English
Measuring out cleaning agents
— Use cleaning agents sparingly to protect
the environment
— The cleaning agent must be appropriate
for the surface to be cleaned.
! Using the cleaning agent metering valve
(item 31) set the concentration of the
cleaning agent as specified by the
manufacturer
Approximate values at maximum operating
pressure

Intended use

For cleaning: machines, vehicles, buildings,
tools, facades, patios, gardening
implements, etc.
Warning!
— Heed appropriate safety regulations for
use at petrol stations or in other
hazardous environments.
Please ensure waste water containing
mineral oil
does not contaminate soil, lakes and rivers
or the sewerage system. Therefore, please
wash engines and underbodies only in
appropriate washing installations provided
with oil traps.
Working with high-pressure nozzle
Spray angle is crucial to efficiency of high-
pressure jet.
Use is normally made of 25°fan jet nozzle
(included).
28
Operating Instructions
Recommended nozzles, available as
accessories
— For stubborn dirt
0°full jet nozzle
— For sensitive surfaces and superficial
dirt
40°-fan jet nozzle
— For thick-film, stubborn dirt
Dirt blaster
— Nozzle with adjustable spray angle,
adaptable to many cleaning tasks
Variable-angle nozzle
Cleaning
! Set pressure/temperature and detergent
concentration appropriately to surface to
be cleaned
Always start by directing high-pressure jet
from a good distance at object to be
cleaned to avoid damage caused by
excessive pressure.
Recommended cleaning method
Loosen up dirt:
! Spray on cleaning agent sparingly and
allow to react for 1...5 min (do not allow
to dry on).
Remove dirt:
! Spray off loosened-up dirt with high-
pressure jet.
Operation with cold water
Removal of slight contamination and rinsing
e.g: gardening implements, patio, tools, etc.
! Set operating pressure as required
! Set temperature control (item 24) to "0"