Connecting the Power Cable
Connect the DC 12 V IN connector of the BTA-801 to the
DC OUT connector of a Betacam-series Camcorder using
the DC power cable supplied with the BTA-801.
BTA-801 (bottom)
To remove: Pull the metal part of the connector in the
direction of the arrow and remove.
Match the connector pins
with the inside of the
connector and insert.
DC power cable
(supplied with the BTA-801)
Attaching the Antennas
Attach the supplied antennas to the two ANT connectors.
1
Align the protruding part
of the connector with the
antenna slot.
2
Turn to lock.
9