Power Supply; Attachment And Installation Procedures; Installing A Diversity Tuner Module (Urx-M2) - Sony URX-M2 Operating Instructions Manual

Power Supply

When incorporated into another component
(e.g., MB-X6, SRP-X500P, etc.), the tuner
module draws its power from that
component.
For details on the power supply to the diversity tuner
module, refer to the operating instructions of the
component in which the diversity tuner module is
installed.
Attachment and
Installation
Procedures
This section describes how to install the
diversity tuner module onto an MB-X6
Tuner Base Unit or SRP-X500P Powered
Mixer.
Installing a diversity tuner
module (URX-M2)
Notes
• Before installing the diversity tuner
module (URX-M2), make sure the unit
into which the tuner module will be
installed is turned off. Do not install or
uninstall the tuner module while the unit
into which the tuner module will be
installed is turned on, as this may result in
malfunction of the tuner module or cause
noise.
• Do not put your fingers on the connectors
on the rear panel of the tuner module or
into the slot on the unit into which the
tuner module will be installed.
• Keep the tuner module away from static
electricity.
Power Supply / Attachment and Installation Procedures 5