Connecting Additional Equipment - Sony KV 13M42 Operating Instructions Manual

Operating Instructions

Connecting Additional Equipment

TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF IN jack on the TV.


To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
Optional Connection
If your VCR is equipped with video outputs, you can get better picture
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.


You can use the
inputs.
4
Rear of TV
button to switch between the VHF/UHF and VIDEO
Video (yellow)
Audio L (white)
Audio R (red)