Connecting Additional Equipment - Sony Trinitron WEGA KV-27FS12 Operating Instructions Manual

Connecting Your TV
Connecting Additional Equipment
TV and VCR
Rear of TV
VIDEO IN
u 35
WoEo
v AUDIOR AUDIOL VIDEO
—a nN OOF @ ® ©)
From HR
cable/ :
antenna
3 (Optional connection)
1 Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
) To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set.on the rear of your VCR).
(Optional connection)
3 If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/ VIDEO IN on
your TV.
) For optimum picture quality, use S VIDEO instead of the yellow AV cable.
S VIDEO does not provide sound, the audio cables must still be connected.
1 You can use the ner? button to switch between the VHF/UHF and VIDEO
inputs.