Optional Equipment; Connecting Equipment To The Tv; Additional Information When Connecting Equipment - Sony FD Trinitron KV-28DX20U Instruction Manual

Optional Equipment

Connecting equipment to the TV

Using the following instructions, you can connect a wide range of optional equipment to your TV.
Connecting equipment to the TV
1. Connect your equipment to the designated TV socket.
2. Press the button repeatedly on the remote control until the correct input symbol for
your equipment appears on the TV screen:
Symbol Input signals
1
• Audio/video input signal through the scart connector
• RGB input signal through the scart connector
• Audio/video input signal through the scart connector
2
phono sockets
• S video input signal through the scart connector
s 2
sockets
3 • Audio/video input signal through the scart connector
3. Switch on the connected equipment.
4. To return to normal TV operation, keep pressing the
until the TV picture appears.
Note: To avoid picture distortion, do not connect equipment to the
sockets at the same time.

Additional information when connecting equipment

Connecting a VCR
We recommend you connect your VCR to the
a scart lead, use the 'Manually Tuning the TV' section of this instruction manual to tune in
the VCR signal to TV programme number'0'.
Connecting headphones
Plug in your headphones to the
Connecting to external audio equipment
Plug in your hi-fi equipment to the
the audio output from the TV. The output level from the
the volume of the headphones (refer to the 'Adjusting the sound' section of this manual).
For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the
signal using the instructions on this page. Finally, refer to the 'Adjusting the sound' section
of this manual and select 'A' on the sound menu screen.
28
and
C D
and
B D
socket using a scart lead. If you do not have
H
socket on the front of the TV set.
A
sockets on the rear of the TV if you wish to amplify
E
F
F
or the
G
or the phono
G
H
button on the remote control
, , and
B C D
sockets can be varied by adjusting
E
s
B
A C
MONO
L/G/S/I R/D/D/D
s
2
S-VHS/Hi8
camcorder
G
1 2
PlayStation
2 input
+ +
MONO
P
_ _
2 L/G/S/I R/D/D/D
2
D
8mm/Hi8
camcorder
+ +
P
_ _
2
.. ..
1 2 S 2 3
R/D/D/D L/G/S/I 5V 200mA
E F G H
.. ..
2 3
1 2 S
5V 200mA
R/D/D/D L/G/S/I
VCR
Hi-Fi