Additional TV Features
Naming a channel (Analogue channels only)
Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input video
source using up to five characters (letters or numbers).
22
1. Press the MENU button on the remote control to display
the menu on the TV screen.
v
2. Press the
button to select the
b
screen then press the
menu.
v
3. Press the
button to select 'Manual Programme Preset'
b
then press the
button to enter the 'MANUAL
PROGRAMME PRESET' menu.
V
v
4. Press the
or
buttons to select the channel you wish
to name.
b
5. Press the
button repeatedly until the first element of
the 'LABEL' column is highlighted.
V
v
6. Press the
or
buttons to select a letter or number
(select '-' for a blank) then press the
confirm. Select the other four characters in the same
way.
7. After selecting all the characters, press the OK button.
8. Repeat steps 4 to 7 if you wish to label other channels.
9. Press the MENU button to remove the menu from the
TV screen.
symbol on the menu
button to enter the 'PRESET'
b
button to