Eprom/Flash Configuration Header (J12) - Motorola MVME162LX 300 Series Installation And Use Manual

EPROM/Flash Configuration Header (J12)

The MVME162LX Embedded Controller comes with 1 MB of flash
memory and four EPROM sockets ready for the installation of EPROMs,
which may be ordered separately. The EPROM locations are standard
JEDEC 32-pin DIP sockets that accommodate four jumper-selectable
densities (128 Kbit x 8; 256 Kbit x 8; 512 Kbit x 8; 1 Mbit x 8) and permit
disabling of the flash memory.
Header J12 provides eight jumpers to configure the EPROM sockets.
1
15
CONFIGURATION 1: 128K x 8 EPROMs
1
15
CONFIGURATION 3: 512K x 8 EPROMs
http://www.mcg.mot.com/literature
J12
2
1
16
J12
2
15
CONFIGURATION 5: 1M x 8 EPROMs
WITH ONBOARD FLASH DISABLED
16
1
J12
2
15
CONFIGURATION 2: 256K x 8 EPROMs
1
16
15
CONFIGURATION 4: 1M x 8 EPROMs
Hardware Preparation
J12
2
16
J12
2
16
2-5
2