The Toolbar - ABB UMC100.3 Manual

14 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Application elements
—

The Toolbar

The toolbar is at the top of the custom editor. It provides quick access to the most important functions.
New
Print
Import
Preview
Print
Cut/Copy/Paste
Export
Command Description
New Creates a new blank application. An existing application will be deleted.
Import Import an application and replace the present one. This allows you to reuse existing applications from other projects.
Export Exports the application to disk for later use.
Cut/Copy/Paste Known Windows® functions to cut out, copy and paste selections (one or more elements)
Undo / Redo Known Windows® functions to undo / redo changes. If you close the editor the Undo History is lost.
Zoom In (+) Zoom in the worksheet to display more details.
Zoom Out (-) Zoom out and display less details but a bigger part of the worksheet.
Zoom Actual Size 1:1 Zoom out to display the application in actual size.
Zoom to Fit Zoom is set in a way that all function blocks of the application can be displayed. This function provides a full overview
on the application.
Zoom Whole Diagram Show the complete worksheet.
Function Block The firmware of a UMC100 supports a specific set of function blocks. Newer firmware versions may have support for
Library Version additional function blocks. The version selected here must match the one from the UMC firmware.
Verify Project The checker checks that the application is consistent and can be executed from the UMC. e.g. it enforces that at least
one control function block is used etc. If the checker reports any errors the application can be saved but the variables
holding the application are set to zero. If a download to the UMC occurs now the UMC detects an invalid application
and reports an error.
Apply If you have made changes to the application in online mode press this button to download the logic into the UMC.
The Apply button is only available in online mode.
Online Toggle between online and edit mode. In online mode the signal status is shown
Undo Zoom In
Redo Zoom Out
Set Zoom 1:1
Zoom to Fit
Zoom Actual Size
Verify Project
Apply Changes
(only if online)
Function Block
Library Version in use
Online/edit