Identifying Parts And Controls - Sony SDM-HS75P Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
The 1 (power) switch and the control buttons are on the lower
right part of the front of the monitor.
Front of the display
INPUT OK
7
6 5 4
Rear of the display
INPUT OK MENU
MENU
1
3 2
8
1 1 (Power) switch and indicator (pages 9, 15)
To turn the display on or off, press the 1 (power) switch
upward.
The power indicator lights up in green when the display is
turned on, and lights up in orange when the monitor is in
power saving mode.
Press upward to turn the display on or off.
2 MENU button (page 10)
This button displays or closes the main menu.
3 m/M buttons (page 10)
These buttons function as the m/M buttons when selecting
the menu items and making adjustments.
4 OK button (page 10)
This button selects the item or executes the settings in the
menu.
5 button (page 16)
This button is used to change the brightness of the screen.
6 INPUT button (page 9)
This button switches the video input signal between INPUT1
and INPUT2 when two computers are connected to the
monitor.
7 Light sensor (page 16)
This sensor measures the brightness of the surrounding area.
Be sure not to cover the sensor with papers, etc.
8 Security Lock Hole
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
GB
5