Troubleshooting - Lenoxx Healthy Choice PC8000 User Manual

Troubleshooting

Symptom
Lid does not lock
Cannot open the lid
after air exhaust
Air escapes from the
rim of the lid
Air escapes from the
float valve
The float will not rise
Display E1
Display E2
Display E3
Display E4
Possible Reasons
The ring is not properly
installed
The float is seized by the push
rod
The float is still up
No sealing ring was installed
Food residue on sealing ring
Sealing ring worn out
Lid not locked properly
Food stuck on the sealing ring
of the float valve
The sealing ring on the float
wore out
The pressure limit valve is not
placed properly
Not enough food and water
Air escaping from the rim of the
lid and the pressure limit valve
Sensor control- broken circuit
Sensor control- short circuit
Inner pot temperature
overheats
Pressure switch error
Solutions
Reinstall the ring
Push the rod with
hands
Press the float down
Install the sealing ring
Clean sealing ring
Replace the sealing
ring
Rotate lid fully
Clean the sealing ring
Replace the sealing
ring
Place the device to
Pressure
Check recipe for
proper quantity
Call our Consumer
Service Center
Call our Consumer
Service Center
Call our Consumer
Service Center
Wait for it to cool down
Call our Consumer
Service Center