Adjusting The Convergence (Conv); Adjusting The Quality Of The Picture (Screen) - Sony Trinitron CPD-E500E Operating Instructions Manual

Adjusting the convergence (CONV)

The CONV settings allow you to adjust the quality of the picture
by controlling the convergence. The convergence refers to the
alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
These settings are stored in memory for all input signals.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
press the center of the control button again.
The CONVERGENCE menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select To
horizontally shift red or blue shadows
vertically shift red or blue shadows
vertically shift red or blue shadows at
TOP
the top of the screen
V CONVER TOP
vertically shift red or blue shadows at
BOT
the bottom of the screen
V CONVER
BOTTOM
Adjusting the quality of the picture
(SCREEN)
The SCREEN settings allow you to adjust the quality of the
picture by controlling the moire and landing.
• If the color is irregular at the corners of the screen, adjust the
landing.
• If elliptical or wavy patterns appear on the screen, cancel the
moire.
The CANCEL MOIRE and MOIRE ADJUST settings are stored
in memory for the current input signal. All other settings are
stored in memory for all input signals.
CONV and
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
and press the center of the control button again.
The SCREEN menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select
LANDING
LANDING
LANDING
LANDING
CANCEL MOIRE*
MOIRE ADJUST
* Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Example of moire
Note
The picture may become fuzzy when CANCEL MOIRE is set to ON.
SCREEN
To
reduce any color irregularities in the
screen's top left corner to a minimum.
reduce any color irregularities in the
screen's top right corner to a
minimum.
reduce any color irregularities in the
screen's bottom left corner to a
minimum.
reduce any color irregularities in the
screen's bottom right corner to a
minimum.
turn the moire cancellation function
ON or OFF.
(MOIRE ADJUST) appears in
the menu when you select ON.
adjust the degree of moire
cancellation until the moire is at a
minimum.
GB
11