Analog Inputs; Bluetooth Communications - Fluke Datapaq TP3 User Manual

Analog Inputs

In addition to storing data from thermocouple input, the TP3 can be specified to
support the recording of current and/or voltage data to allow other types of
sensor to be used. For measurement ranges and accuracy, see p. 13.
Such analog input is made via one or more of the logger's numbered sockets
(when fitted, colored white), relevant channel numbers being shown on a label
on the rear of the logger. For each analog input on the logger, a white plug is
provided for connection to the chosen sensor device.
Incorrect connection to the current and/or voltage sockets may cause serious
damage to the logger. Always check the label carefully to ensure that input cables
Data from the analog-input channels is displayed by Insight as a custom unit on
the right-hand axis of the graph window. To set up custom units in Insight,
select Tools > Options > Units, and click Help for a full explanation.
Analogue inputs support the same sample intervals as thermocouples (see p. 13).
Analog inputs can be calibrated by Fluke Process Instruments, and this generates a
separate calibration certificate from that produced by calibrating thermocouple
inputs (see p. 33). Unlike thermocouple inputs, however, the logger does not
store the results of analog-input calibration, and thus: a calibration certificate
cannot be printed by the user; a logger correction factor file for analog inputs

Bluetooth Communications

Where unavailable, Bluetooth options in Insight will be greyed out.
As an alternative to using its communications lead, the logger can use Bluetooth
to communicate with the PC. This can be used for:
• Resetting the logger (p. 41).
• Downloading data from the logger to the PC (p. 48).
• Short-range wireless telemetry (see below).
• Downloading diagnostic information for troubleshooting (see p. 64).
DATAPAQ TP3
WARNING
are connected to the correct channels.
cannot be produced.
Bluetooth communication is not available in all countries.
Specifications and Operation
29