Chapter 2 Installation - Zenith ZVM-133-TC Service Manual

See Touch Control Performance Test and Touch Con-
trol Alignment and Checkout in the Servicing chapter.
1. Connect the cables as shown in Figure 1-2.
2. Select green or color:
• If the monitor is to be used only for monochrome
text display, select green by pushing in the
Green/White switch.
• If the monitor is to be used for graphics display
or text and color display, select color by pulling
out the Green/White switch.
Chapter 2
Installation
3. Turn on the computer and video monitor. The
power indicator on the front of the video monitor
should light.
4. After the monitor has warmed up, adjust the bright-
ness control for the desired display brightness.
5. If the monitor is to be used with a Zenith personal
computer, display the color bar from the ROM. Ad-
just the Contrast control so that the eight bars on
the right side of the display have the desired color
intensity.