Yamaha Clavinova CVP-205 Service Manual page 18

20-6 Remove the four (4) screws marked [15A] and the five (5)
screws marked [18A]. The arm assembly can then be
removed. (Fig. 1, Fig. 22)
* The left and right arm assembly each can then be removed
in the same manner.
21. Back Top Board Assembly
(Time required: About 45 minutes)
21-1 Remove the back board assembly. (See procedure 4.)
21-2 Remove the FU assembly. (See procedure 5.)
21-3 Remove the top board assembly. (See procedure 9.)
21-4 Remove the key cover assembly. (See procedure 13.)
21-5 Remove the panel assembly. (See procedure 14.)
21-6 Remove the keyboard assembly. (See procedure 18.)
21-7 Remove the main unit. (See procedure 19.)
21-8 Remove the arm assembly L (or R). (See procedure 20.)
21-9 Remove the six (6) screws marked [15B] and the three (3)
screws marked [18B]. The back top board assembly can
then be removed. (Fig. 1, Fig. 23)
[18A]
[18A]: Bind Head Tapping Screw-1 3.5x16 MFZN2Y (EP030190)
22. Front Board Assembly
(Time required: About 30 minutes)
22-1 Remove the back board assembly. (See procedure 4.)
22-2 Remove the main unit. (See procedure 19.)
22-3 Remove the speaker box assembly. (See procedure 5.)
22-4 Remove the four (4) screws marked [BB] and the two (2)
screws marked [BC]. The front board assembly can then
be removed. (Fig. 24)
23. Side Board Assembly
(Time required: About 20 minutes)
23-1 Remove the back board assembly. (See procedure 4.)
23-2 Remove the main unit. (See procedure 19.)
23-3 Remove the two (2) screws marked [BD] and the two (2)
screws marked [CA]. The side board assembly can then be
removed. (Fig. 25)
* The left and right side board assembly each can then be
removed in the same manner.
Front rail assembly
Arm assembly R
[18A]
Fig. 22
Arm assembly L
[18B]
[18B]: Bind Head Tapping Screw-1 3.5x16 MFZN2Y (EP030190)
Fig. 23
CVP-205/CVP-205M
Back top board assembly
18