Enabling Input/Output Priority Queuing; Changing Logical Partition Input/Output Priority Queuing Values; Change Lpar I/O Priority Queuing - IBM Z9 Planning Manual

Enabling Input/Output Priority Queuing

|
|
|
|

Changing Logical Partition Input/Output Priority Queuing Values

Figure 3-29. Change LPAR I/O Priority Queuing
Use the Enable I/O Priority Queuing task available from the CPC Operational
Customization tasks list to either enable or disable I/O priority queuing for the entire
CPC.
Figure 3-28. Enabling I/O Priority Queuing
Use the Change LPAR I/O priority queuing task available from the CPC Operational
Customization tasks list to set the minimum and maximum I/O priority queuing
values for logical partitions.
Note: Minimum I/O Priority and Maximum I/O Priority should be specified as a
range of values that give software some ability to make choices. All logical
Chapter 3. Determining the Characteristics of Logical Partitions
3-81