ActionTec Broadband Router MI408 User Manual page 38

Actiontec Broadband Router User Manual
Additionally, to add a new product or product family, click New IP Range in the
"Vendor Class " column below "
ID
60 (Vendor Class Identifier). " This generates the "
Set the device name,
click Apply.
DHCP Relay Select this option to have the Router function as a
enter a new address for the relay, click New IP Address. The "
IP
Server Address" screen appears. Enter the new
text boxes, then click Apply.
Routing
The Router can be configured to use static or dynamic routing. Dynamic rout-
ing automatically adjusts how packets travel on the network, while static routing
specifies a fixed routing path to neighboring destinations.
There are two options in the "Routing" section of the "Configure
Link Ethernet" screen: Basic or Advanced.
Basic Select this option for basic routing operation.
Advanced To set up the Router's Broadband Ethernet connection for advanced
routing:
1. Select Advanced from the Routing drop-down menu.
2. Enter a device metric in the "Device Metric" text box. The device metric is
a value used by the Router to determine whether one route is superior to
another, considering parameters such as bandwidth and delay time.
Address Distriution According to
IP
range, and priority level in the appropriate text boxes, then
IP
Server Pool Settings" screen.
DHCP
address in the appropriate
IP
36
Option
DHCP
relay. To
DHCP
Relay
DHCP
Coax
WAN