Automatic Standard Buttonhole With Auto-Length - Bernina 325 Manual

Buttonholes Buttonhole Buttonholes

Automatic standard buttonhole with auto-length

38
Buttonhole foot with slide no. 3A
Automatic standard buttonhole
The lens on Buttonhole foot with slide no. 3A automatically registers the length
of the buttonhole for exact duplication.
►
Programming the standard buttonhole
1. sew the first bead forwards, stop the sewing computer
1
the sewing computer sews the following automatically:
2. straight stitches in reverse
3. the first bartack
4. the second bead forwards
5. the second bartack and securing stitches
2 3 4 5
Auto-buttonhole
⦁
⦁
⦁
the active step blinks on the screen
When any automatic buttonhole is selected, presser foot no. 3 is
indicated on the screen.
WARNING!
The slide foot must lie perfectly flat on the fabric! If the slide
foot rests on a seam allowance, the length cannot be measured
accurately.
⦁
press the Quick reverse button
►
«auto» and the presser foot no. 3A appears on the display = buttonhole
length is programmed
⦁
the sewing computer stops and returns automatically to buttonhole
begin
all subsequent buttonholes will be sewn to exactly the same length (no
need to press the Quick reverse button)
clear the program by pressing the «clr» button
Saving programmed buttonholes in long-term memory (see p. 41)
Sewing speed
⦁
sew at moderate speed for best results
⦁
sew all buttonholes at the same speed for a consistent bead
density