Bobbin Case
To remove the bobbin case
⦁
raise needle
⦁
power switch to «0» (off)
⦁
open the bobbin cover
⦁
grasp the latch of the bobbin case
⦁
remove bobbin case
To insert the bobbin case
⦁
hold the bobbin case latch
⦁
the finger on the case should point upwards
⦁
insert the case so that it clicks into place
Bobbin thread cutter
⦁
insert the bobbin case
⦁
take the thread over cutter
⦁
close the bobbin cover
A
The bobbin thread does not have to be brought up as the loose end
is just the right length to start sewing.
and cut it
A
Sewing preparations
Sewing preparations
13