To Turn Off The Beep Sound (Beep) - Sony Walkman NW-MS11 Operating Instructions Manual

5
Press (PUSH) of the Seesaw key.
"VOL LO xx"* blinks.
* xx is a numeric value.
V OL L O
6
Press the "VOLUME +/–" button to
set the settings of LO, MID, or HI.
1 Sets numeric of LO.
2 Press B to display "VOL MID xx,"
and set it using "+/–."
3 Do the same to set "VOL HI xx."
7
Press (PUSH) of the Seesaw key.
8
Press the MENU button.
The display returns to normal.
While the above settings, the volume can
be adjusted to LO, MID, or HI.
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU
button.
Note
If AVLS is set (page 14), the volume may be lower
than previous settings.
x x
To turn off the beep
sound (BEEP)
BEEP ON: a beep will sound to indicate that
operation has been accepted.
BEEP OFF: no beep sound will be heard.
1
Press the MENU button.
The menu is displayed.
R E P : O F F
2
Press b or B of the Seesaw key to
display "BEEP : ON."
B E E P : O N
3
Press (PUSH) of the Seesaw key.
"ON" blinks.
4
Press b or B of the Seesaw key to
display "OFF."
B E E P : O F F
5
Press (PUSH) of the Seesaw key.
6
Press the MENU button.
The display returns to normal.
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU
button.
To turn on the beep sound
Select ON in step 4.
continued
17