Wiring The D-Sub Connector - Omron SYSMAC NX-CIF Series User Manual

Unit
4-3-2

Wiring the D-Sub Connector

Connect the D-Sub connector to the external serial communications device with a Cable with a D-Sub
Connector (socket).
Use #4-40UNC inch screws for the connector lock screws.
The following table gives the recommended wires and D-Sub connectors.
Wiring part
Wires Shielded twisted-pair cable
Size: AWG28 to AWG22
(0.08 to 0.34 mm
D-Sub 
9-pin socket
connector
NX-series Communications Interface Units User's Manual (W540)
Specifications
---
2
)
OMRON
Hood: XM2S-0913 (9-pin, inch screws)
Socket: XM3D-0921 (9-pin)
4 Installation and Wiring
Recommended products
4
4 - 19