Omron SYSMAC NX-CIF Series User Manual page 195

Index Subindex
Object name
(hex) (hex)
5006 --- Flow Control
01 Ch1 Flow Control
• The following table gives the meanings of the set values for the Ch1 Flow Control.
Set value
0 None
1 RS/CS flow control
2 Xon/Xoff control
Index Subindex
Object name
(hex) (hex)
5007 --- Flow Control Target
01 Ch1 Flow Control
Target
• The following table gives the meanings of the set values for the Ch1 Flow Control Target.
Set value
0 Transmission and reception
1 Transmission
2 Reception
Index Subindex
Object name
(hex) (hex)
500A --- Number of Characters
to Determine the
*1
End
01 Ch1 Number of Char-
acters to Determine
the End
*1. This object is valid when the reception completion condition is set to the number of characters to determine the end.
NX-series Communications Interface Units User's Manual (W540)
Default Data range
--- ---
0 0 to 2
Description
Default Data range
--- ---
0 0 to 2
Description
Default Data range
--- ---
0 0 to 10,000
Data
Unit Access
type
--- --- ---
--- USINT RW
Data
Unit Access
type
--- --- ---
--- USINT RW
Data
Unit Access
type
--- --- ---
0.1 UINT RW
char-
acter
Appendices
Data
I/O allo-
attri-
cation
bute
--- ---
No Y
A
Data
I/O allo-
attri-
cation
bute
--- ---
No Y
Data
I/O alloca-
attri-
tion
bute
--- ---
No Y
A - 15