Moving A Track On A Disc; Changing The Order Of A Group On A Disc - Sony MZ-M200 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual

Moving a track on a disc

You can move a track from one group to
another or from inside a group to outside the
group. When you move tracks, track numbers
are automatically renumbered. This function
can be set on the recorder only.
1
While the recorder is stopped or
playing the track you want to move,
enter the menu (  page 49) and
select "Edit" – "Move" – "Track
Move".
If the selected track is in the group, the
group number to which the currently
selected track belongs appears in the
display.
If the selected track is not in the group, the
currently selected track number appears in
the display.
2
• If you are moving a track from
inside a group to outside the
group, or if there is no group on a
disc
Skip this step.
• If you are moving a track within
the same group
Press the jog lever while the group
number to which the currently selected
track belongs is displayed.
• If you are moving a track to a
different group
Move the jog lever toward FF/FR to
select the destination group number, and
then press the jog lever.
Select the destination group number.
56
3
Move the jog lever toward FF/FR to
select the destination track number,
and then press the jog lever to enter
the selection.
Select the destination track number.
(Example: when moving the selected track to
the track number 10 in the group 02)
Note
If all tracks are moved out of the group, the group
automatically disappears from the disc.
Changing the order of a
group on a disc
This function can be set on the recorder only.
1
While the recorder is stopped or
playing a track within a group
whose order you want to change,
enter the menu (  page 49) and
select "Edit" – "Move" – "Group
Move".
The group number to which the currently
selected track belongs appears in the
display.
2
Move the jog lever toward FF/FR
to select the destination group
number, and then press the jog
lever to enter the selection.
Select the destination group number.
(Example: when moving "Group01" to the
second group (Group 02))