Playing CDs and MDs
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control on
the deck, = and + buttons on the remote, or
number buttons on the remote.
When using the remote, set SELECT to CD or MD.
·
SELECT
>10
=/+
To locate
The next or succeeding
tracks
The beginning of the
current or preceding
tracks
A specific track
directly Z
A specific track by
using AMS
z
When you directly locate a track with a number over
10 Z
Press >10 before entering the corresponding digits.
Press >10 once if it is a 2-digit track number, and twice
if it is a 3-digit track number (for MD only).
To enter "0", press 10/0.
Examples: •To play track number 30
Press >10 once, then 3 and 10/0.
•To play track number 100
Press >10 twice, then 1, 10/0 and 10/0.
14
AMS
·
1 / u
Number buttons
^
<
>
^
Do the following:
During playback, turn AMS clockwise
(or press + repeatedly) until you
find the track.
During playback, turn AMS
counterclockwise (or press =
repeatedly) until you find the track.
Press number button(s) to enter the
track number.
1 While the deck is stopped, turn
AMS until the track number you
want to locate appears.
2 Press AMS or ·.
z
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
z
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable MD only), or disc name (see page 12).