Checking The Play Information - Sony DVP-S735D Operating Instructions Manual

When using headphones
Select VIRTUAL SURROUND HEADPHONES when you
want to experience virtual 3D surround effects through
your headphones.
VIRTUAL SURROUND HEADPHONES
Uses 3D sound imaging to place the listener in an
acoustically sophisticated movie studio by giving greater
definition to the sound. Adjust the volume using the
PHONES LEVEL control to the right of the PHONES
connector. You can also enjoy the surround effect through
your receiver's headphones connector when your receiver
is connected to this player.
z
You can select "VIRTUAL SURROUND HEADPHONES" directly
Press VIRTUAL SURROUND HEADPHONES on the player.
To turn it off, press the button again.
Notes
• When you press VIRTUAL SURROUND HEADPHONES on
the player, the VIRTUAL 3D SURROUND mode turns off and
vice versa.
• If the player is set up to output the signal from DIGITAL OUT
(OPTICAL or COAXIAL) and you are using your receiver's
headphones, the surround effect will be heard only when you
set "DOLBY DIGITAL" to "D-PCM," "MPEG" to "PCM" and
"DTS" to "D-PCM" in "AUDIO SETUP."
Checking the Play
Information
You can check information such as the bit rate or the disc
layer that is being played.
While playing a disc, the approximate bit rate of the
playback picture is always displayed as Mbps (Mega bit
per second) and the audio as kbps (kilo bit per second).
Select "ADVANCED" after pressing DISPLAY.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
BIT RATE
ADVANCED
Select:
x ADVANCED
The default setting is underlined.
When playing a DVD
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the pick-up point.
• OFF: turns off ADVANCED display.
DVD
BIT RATE
kbps
0 1000
Mbps
0 5 10
ENTER
41