Accessing/Using The Setup Menu; 3D Audio - Garmin GTR 200 Pilot's Manual

• EQUALIZER (OFF/RCK/CLS/POP) - Adjusts the music input audio
response similar to an equalizer with presets. OFF does not change
response, RCK for rock music, CLS for classical music, and POP for pop
music.
• KEY BEEPS (OFF/0-100%/COM) - Key Beep volume can be configured
OFF, as volume value (0-100%), or slaved to COM volume.
• CONTRAST (-10 to +10) - Adjusts the display contrast level.

Accessing/Using the SETUP Menu:

1) Press the MENU key.
2) Turn the LARGE Knob to highlight SETUP and press the SMALL Knob.
3) Turn the LARGE Knob to navigate. Turn or Press the SMALL Knob to
change a selection.
4) Press the BACK Softkey to return to the Main Menu.

3D AUDIO

3D Audio is useful when multiple audio sources are present. By using
different responses in each ear, 3D audio processing creates the illusion
that each audio source is coming from a unique location or seat position.
Because this feature uses different signals for left and right channels,
it requires wiring for stereo intercom and stereo headsets. If 3D audio
is activated when mono headsets are in use, the listener will still hear all
audio sources; however, there is no benefit from location separation.
During normal operation and with 3D Audio enabled, the listener
hears the Active Frequency at the 12 o'clock position. If the Standby is
selected for monitoring, the listener hears the Active at 11 o'clock and
the Standby at the 1 o'clock position. Intercom positions are processed
to sound like their relative seat location. By default, the GTR 200/200B
assumes the pilot sits in the left seat. Pilot seat location can be changed
in configuration mode, see the GTR 200/200B Installation Manual for
details.
190-01553-01 Rev. G
Garmin GTR 200/200B Pilot's Guide
GTR 200/200B
15