Oki OkiPos 441 Software Manual page 67

b. If dithering is On
• In the Name field, enter a name for the image.
• Adjust the width by entering a width value or moving the slider.
• Select the appropriate dithering method.
• Set the other options (brightness or dither options) as appropriate.
Note
The "options" vary according to whether dithering is on or off: if off, you
can set the brightness; if on, you can set the dithering options. Try
various combinations until you find the settings that give optimal print
results.
Important!
The computer displays the image in unprocessed form, and cannot
provide a reliable preview of what the printed logo will look like.
Because the OKIPOS 441 properties differ from the computer's
display properties, on-screen preview images may not accurately
reflect print densities and other such characteristics. It is strongly
recommended that you run a test print before writing the image into
the printer.
4. Click the OK button to move the image into the logo list.
67 • OKIPOS 441 Configuration Utility (Windows 2000/XP)