Sony Spressa CRX0811 User Manual page 16

8. Attach the IDE cable
Attach the EIDE cable so that the red line that signifies
Pin 1 of the cable is aligned with Pin 1 on the drive.
Although the cables that Sony includes with the unit
are keyed so that they may only be installed properly,
other cables may not be keyed the same. If you use
your existing cable, please be sure to align it properly.
The red line side of the cable goes to the set of pins
closest to the power connector on the drive.
9. Attach the DC power cable.
Plug your standard power connection to the drive.
22
Pin 1
CD-RW Recorder User's Guide
10. Connect the audio cable.
If you have a sound card, you can attach the audio
cable to the audio out connectors.
11. Power up system and Install the CD-Recording
software that came with your drive.
12. Restart System.
If there are any difficulties in completing the operations
outlined in this manual, please see the troubleshooting
guide in Chapter 4. You may also contact the Sony
Technical Support Center.
CD-RW Recorder User's Guide 23