Technical Specifications - 3Com Switch 4210 Series Getting Started

Technical
Specifications
Port LED
Figure 12 describes the 10/100Base-TX autosensing port's Link/Act LED.
Table 7 The Link/Act LED on the 3Com Switch 4210
LED
Link/Act LED (green)
Table 8 describes the Speed LED of the 10/100Base-TX port.
Table 8 The 10/100Base-TX port Speed LED on the Switch 4210
LED
10/100Base-TX autosensing
port Speed LED (green)
For a description of the Link/Act LED of the Combo port, see Figure 12. When the
port is connected correctly, the Speed LED indicates the operating speeds of the
Combo port, as shown in Figure 10.
Table 9 The Combo port Speed LED on the Switch 4210
LED Operating port
Combo port 100/1000Base-X
Speed LED SFP port
(green)
10/100/1000Base-T autosensing
port
Table 10 Technical specifications for the Switch 4210
Model Switch 4210 26-port Switch 4210 18-port Switch 4210 9-port
43.6 × 440 × 160 mm
Physical dimensions (H
× W × D) (1.7 × 17.3 × 6.3 in.)
≤4.7 lbs (2.14 Kgs)
Weight
Number of fixed ports 24 × 10/100Base-TX
autosensing Ethernet
ports
2 × 100/1000 Mbps
Combo ports
1 × Console port
Number of
management port
Status Description
ON The port is connected properly.
BLINKING The port is in the active state and there is
traffic on the port.
OFF The port is not connected or is incorrectly
connected.
Status Description
ON The port is operating at 100 Mbps.
OFF The port is operating at 10 Mbps.
Status
Connected ON
to a 1000
Mbps optical
module
Connected OFF
to a 100
Mbps optical
module
ON
OFF
43.6 × 360 × 160 mm
(1.7 × 14.2 × 6.3 in.)
≤ 3.4 lbs (1.53 kg.)
16 × 10/100Base-TX
autosensing Ethernet
ports
2 × 100/1000 Mbps
Combo ports

Technical Specifications

Description
The port is operating at
1000 Mbps.
The port is operating at
100 Mbps.
The port is operating at
1000 Mbps.
The port is operating at
10/100 Mbps.
43.6 × 230 × 160 mm
(1.7 × 9.1 × 6.3 in.)
≤2.3 lbs (1.06 kg.)
8 × 10/100Base-TX
autosensing Ethernet
ports
1 × 100/1000 Mbps
Combo port
17