Smsc; E-Mail Configuration - Siemens TIM 1531 IRC Operating Instructions Manual

4.17

SMSC

Enabling SMSC
If you want to use SMS, enable the SMSC (Short Message Service Center).
Enter the phone number of the SMSC. You will receive the number from your service
provider.
4.18

E-mail configuration

Configuring e-mails in STEP 7
In the "E-mail configuration" entry, you configure the protocol to be used and the data for
access to the e-mail server.
In the message editor ("Messages" entry in STEP 7), you configure the individual e-mails,
see section Messages (Page 127).
E-mail configuration
If you want to use the secure transfer of e-mails, the module must have the current date and
the current time of day.
With the default setting of the SMTP port 25, the module transfers unencrypted e-mails.
If your e-mail service provider only supports encrypted transfer, use one of the following
options:
● Port no. 587
By using STARTTLS, the module sends encrypted e-mails to the SMTP server of your e-
mail service provider.
Recommendation: If your e-mail provider offers both options (STARTTLS / SSL/TLS), you
should use STARTTLS with port 587.
● Port no. 465
By using SSL/TLS (SMTPS), the module sends encrypted e-mails to the SMTP server of
your e-mail service provider.
Ask your e.mail service provider which option is supported.
Importing the certificate with encrypted transfer
To be able to use encrypted transfer, you need to load the certificate of your e-mail account
in the certificate manager of STEP 7. You obtain the certificate from your e-mail service
provider.
TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
Configuration
4.17 SMSC
91