Hotpoint C368E Instructions Manual page 14

Electronic Clock S Automatic Oven Timer
Operation
(c3s7E e c3saE)
"'- " 1 1 /
SETTING THE TIME OF DAY
~I~
n
0 0
l:
Step 1
Make sure all oven controls are turned
Off.
----1~
u.
F
/
1
I \ "'-
Step
2 Check the electricity supply to the cooker is turned on.
0000 0 0-
Step 3 When switched on the display will show 0.00 and the Auto symbol,
flashing intermittently.
l~
o. o o
I
Step
4 Press & hold in both the Cook Period & End Time buttons together.
t t
JJol
steps
0QQ0tlj
Step 6
With the Cook Period & End Time buttons still held in, press either the"+"
or"-" buttons to set the correct time of day.
Release all the buttons simultaneously.
THE TIME OF
DAY IS
NOW
SET.
To
change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for an
Auto Cooking Programme.
SETTING THE MINUTE MINDER
Step 1
Ensure the time of day is set correctly.
I
0 . 0 0
I
j
Step 2 Press and hold the Minute Minder button.
t
ru
Step 3 With the Minute Minder button held in, set the required Minute Minder
OOOOOO
period using
the"+".and"-:'button~.A'bell'symbol willl~ght
up.
Release all buttons and the t1mer display w1ll revert back to the t1me of day.
The'bell' symbol will remain lit to signify that a Minute Minder period has been
set.
At the end of the set time an audible tone will be heard, and the 'bell' symbol will
flash.
l i
o. oo
I
,,.......:::=:=:==::. ___
Step 4
To cancel the audible tone press the Minute Minder button.
000000
Note 1 When the Minute Minder has been set, the time remaining can be checked at any
time by simply pressing the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by
pressing and holding the Minute Minder button and then at the same time
pressing the
u_,
button until 0.00 appears in the display window.
14