Aux Connection - Porsche 911 Speaker Operating Manual

AUX connection

If your source device is equipped with a LINE-OUT or headphone output, it can also be connected with the 911 Speaker via the AUX-IN
port using an optionally available 3.5-mm audio jack cable. The procedure is as follows:
1. Connect the source device with the audio jack cable.
2. Connect the 911 Speaker AUX-IN port with the audio jack cable.
3. Turn the 911 Speaker on by pressing the power button .
4. Select the AUX-IN port .
5. Play music on your source device.
6. When playing music via AUX connection, the volumes of the 911 Speaker and source device are not synchronised. To achieve maximum possible volume,
set the volume of the 911 Speaker to the maximum level and set the volume of your
source device to the desired level.
Please note: To reduce its energy consumption, your 911 Speaker will automatically remove any Bluetooth
while playing via AUX.
Please note:
Before you remove the audio jack cable from your source device after you have finished playing it,
either lower the volume on your 911 Speaker or switch it off.
Betriebsanleitung_911_Speaker_420x148mm_EN.indd 12-13
AUX connection
1. 911 Speaker
2. Source device
3. 3.5-mm audio jack cable
connections
®
AUX
1.
1
2. 3.
[ EN ] The 911 Speaker
2
3
12 | 13
15.08.17 09:13