Additional Information - D-Link DWM-312 Quick Installation Manual

1. Connect the Ethernet cable to the router's
Ethernet port and to the Ethernet port on
the PC.
2. Configure the PC's IP address to be in the
network segment as the router. The router's
default IP address is 192.168.0.1, with
subnet mask 255.255.255.0.
3. For example, to connect to the router using
the default settings, your PC should have an
IP address in the range: 192.168.0.2-.254
and a subnet mask of 255.255.255.0.
4. Open the web browser and enter
http://192.168.0.1/ in the address box.
5. Log in to the router. The default user name is
admin and the default password is admin.
SNMP
You can manage the router with D-Link
D-View, or any other SNMP-compatible
program. The SNMP function is disabled by
default and must be enabled on the router
first by using the Web UI, as described in the
previous section. The D-View SNMP Network
Management System is a comprehensive
standard-based management tool designed
to centrally manage critical network
infrastructure. D-View provides useful tools
to allow network administrators to effectively
manage device configurations, fault tolerance,
performance, and security.
D-Link offers a free version of D-View which
can allow you to manage up to 25 devices. You
can download or get more information on the
following website: http://dview.dlink.com/.

Additional Information

If you are encountering problems setting up
your network, please refer to the user manual.
TECHNICAL SUPPORT
6
It contains much more detailed information to
get you up and running with your network.
Additional help is available through our offices
listed at the back of the user manual or online.
To find out more about D-Link products or
marketing information, please visit the D-Link
website at: http://www.dlink.com/.
dlink.com/support
DWM-312