Led Status Indications; Additional Information - D-Link DIS-300G Series Quick Installation Manual

LED STATUS INDICATIONS

LED Name Indicator /color
On Green
P1/P2
Off
On Red
Alarm
Off
On Green
Copper port
Flashing Green
Link/Act
Off
On Yellow
Copper port
Speed
Off
On Green
SFP port
Link/Act
Off
On Yellow
SFP port
Speed
Off
DIS-300G-8PSW/DIS-300G-14PSW only
On Green
RR
(Ring Role)
Off
On Green
RS
(Ring Status)
Off
On Yellow
PoE
Off

Additional Information

You can refer to the user manual or visit
Online Support
If there are any issues that are not in the user manual, please visit
which will direct you to your appropriate local D-Link support website.
Warranty Information
Visit
http://warranty.dlink.com/
Condition
P1/P2 power line has power
P1/P2 power line disconnect or does not have power supplied
Ethernet link fails, alarm or power failure alarm occurs
No Ethernet link fails and no power failure alarm
Ethernet link up but no traffic is detected
Ethernet link up and there is traffic detected
Ethernet link down
A 1000Mbps connection is detected
No link, a 10Mbps or 100 Mbps connection is detected
Ethernet link up
Ethernet link down
SFP port speed 1000Mbps connection is detected.
No link or a SFP port speed 100Mbps connection is detected
One of 3 Ring group is enabled and is Master role.
Ring is slave role
Ring fail happen and detected
No ring fail detected
PoE is detected
No link
http://support.dlink.com/
to view the D-Link Warranty information.
Quick Installation Guide
for more support.
http://support.dlink.com/
Ver. 1.00(EU) 2017/12/04
8