Table of Contents
Advertisement
Changing the sound and
display settings
You can set:
• CLOCK (page 5).
• D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
• AMBER/GREEN to change the illumination
color to amber or green.
• AUTO-DIM (Dimmer) to change the
brightness of the display.
— Select "AUTO" to dim the display only
when you turn the lights on.
— Select "ON" to dim the display.
• BEEP to turn the beep tones on or off.
• RM (Rotary Remote) to change the operative
direction of the controls of the optional rotary
remote.
— Select "NORM" to use the rotary remote
in the factory preset position.
— Select "REV" when you mount the rotary
EN
remote on the right of the steering
column.
• A.SCRL (Auto Scroll) (page 11).
Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled.
1
Press (SHIFT).
2
Press (2) (SET UP) repeatedly until the
desired setting mode appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n D.INFO* n AMBER/GREEN n
AUTO-DIM n BEEP n RM n A.SCRL*
* When you have not tune the station or there is no
CD/MD being played, these items will not appear.
Note
The displayed item will differ depending on the source.
3
Press (4) (n) to select the desired
setting (for example: ON or OFF).
4
Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.
10
With Optional Equipment
CD/MD Changer
You can control up to 7 CD and MD changers
with this unit.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired changer
appears (for example CD2 or CD3).
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
Elapsed playback time
Disc name*
Track name*
Clock*
1
If there is no prerecorded name for a CD or MD, "NO
*
NAME" appears in the display.
2
If the track name of an MD is not prerecorded, "NO
*
NAME" appears in the display.
3
If the dual information function is on, the clock does not
*
appear in the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).
$
$
1
$
2
$
3
Advertisement
Table of Contents
