Connecting SCALANCE M-800 to WAN
1.11 Additional steps in configuration with the SCALANCE M826 in routing mode
1.11
Additional steps in configuration with the SCALANCE M826 in
routing mode
1.11.1
Creating IP subnet
In routing mode, the interfaces are handled differently.
● Ethernet interface: Connection of the internal IP subnet (vlan 1)
● SHDSL interface: Connection of the external IP subnet (vlan 2)
The Ethernet interface or internal IP subnet has already been configured with the PST. For
this configuration example, only the IP subnet for the SHDSL interface or for the external IP
subnet needs to be configured. The same steps need to be taken on all devices.
Procedure
1. Click on "Layer 3 > Subnetsin the navigation area and on the "Configuration" tab in the
content area.
2. For "Interface (Name)" select the entry "vlan2".
3. For "Interface Name" you can enter a name.
4. Enter the value assigned to the M826 from the "Settings used (Page 12)" table.
5. Click on "Set Values".
40
Getting Started, 01/2019, C79000-G8976-C337-07