Sony 3-270-589-12 (1) Operating Instructions Manual page 97

DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor
HD CHARA [> HD char]: Specifies the HD output
connector(s) to which superimposed text information is
output when CHAR SEL in page P1 of the function menu
is set to "ON".
SD CHARA [> SD char]: Specifies the SD output
connector(s) to which superimposed text information is
output when CHAR SEL in page P1 of the function menu
is set to "ON".
TIME CODE [Time Code]: Settings related to the timecode
generator
TCG REGEN [> TCG regen]: Select the signals to generate
when the timecode generator is set to regenerate mode
(TC MODE on page P2 of the function menu is set to
"REGEN").
UB BINARY GP. [> Binary Gp.]: Settings related to the user
bits binary group flag.
Note
When TCG on page P2 of the function menu is set to anything
other than "INT", and TC MODE is set to "REGEN", the user
bits binary flag setting of external timecode is followed.
VITC POS SEL-1 [> VITC pos-1]: Select a line to insert the
VITC in.
Note
You can insert the VITC signal in two places. To insert it in two
places, set both this item and VITC POS SEL-2.
Description
HDSDI2 [>> HDSDI2]: Superimposed text is output to the
HDSDI OUTPUT 2 connector only. It is off for the HDSDI
OUTPUT 1 and MONITOR connectors.
*ALL [>> ALL]: Superimposed text is output to both of the
HDSDI OUTPUT 1 and 2 connectors and to the MONITOR
connector.
OFF [>> OFF]: Superimposed text is off for both of the HDSDI
OUTPUT 1 and 2 connectors and for the MONITOR
connector.
SDI [>>SDI]: Superimposed text is output to the SDSDI
OUTPUT connector only. It is off for the COMPOSITE
OUTPUT connector.
COMPOSITE [>> COMP]: Superimposed text is output to the
COMPOSITE OUTPUT connector only. It is off for the
SDSDI OUTPUT connector.
*ALL [>> ALL]: Superimposed text is output to both the
SDSDI OUTPUT connector and the COMPOSITE
OUTPUT connector.
OFF [>> OFF]: Superimposed text is off for both the SDSDI
OUTPUT connector and the COMPOSITE OUTPUT
connector.
Description
*TC & UB [>> TC & UB]: Regenerate both timecode signals
and user bits signals.
TC [>> TC] :Regenerate timecode signals only.
UB [>> UB]: Regenerate user bits signals only.
*000:NOT SPECIFIED [>> 000]: Character set not specified
001:ISO CHARACTER [>> 001]: 8-bit characters conforming
to ISO 646 and ISO 2022
010:UNASSIGNED-1 [>> 010]: Undefined
011:UNASSIGNED-2 [>> 011]: Undefined
100:UNASSIGNED-3 [>> 100]: Undefined
101:PAGE/LINE [>> 101]: Multiplex
110:UNASSIGNED-4 [>> 110]: Undefined
111:UNASSIGNED-5 [>> 111]: Undefined
When the system frequency is 60i, 23.98P or 30P
20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line
from 12 to 20.
Factory default setting: *16 LINE [>> 16 line] (line16)
Note
When the system frequency is 60i, 23.98P, or 30P, the VBID
(Video Blanking ID) receives priority over a selection of
"20LINE".
When the system frequency is 50i or 25P
22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from
9 to 22.
Factory default setting: *19 LINE [>> 19 line] (line 19)
97
System Menu