Surround Mode Settings - Sony 480p Operating Instructions Manual

1 2 3
ALL
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
1: ENGLISH
Currently playing program format**
* "PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
The channels in the currently selected track
are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2 +
Center component 1
**The letters in the program format display
indicate the following sound components:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
When playing Dolby Digital and DTS sound tracks,
"LFE" is enclosed in a dotted line when the LFE
signal is not being output.
Current audio format*
PLAY
DVD
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear component 2
LFE (Low
Frequency
Effect)
component 1
SURROUND Mode
Settings
You can enjoy surround sounds while playing
discs, including Dolby Digital and DTS
DVDs, even if you have only 2 or 4 speakers.
Select the surround mode that best suits your
speaker setup.
SUR
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC
2
Press SUR repeatedly to select
one of the surround modes.
See the following explanations given for
each item.
For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
69
c continued