Sony BDP-S7200 Service Manual

Sony BDP-S7200 Service Manual

Blu-ray disc/dvd player
Hide thumbs Also See for BDP-S7200:

Advertisement

SERVICE MANUAL
Ver. 1.0 2014.04
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a USB memory,
memory card reader, digital still camera, and digital
video camera)
Wireless
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band : Channels 1-11 (BDP-S7200:US)
Channels 1-13 (BDP-S7200:AEP,UK)
Modulation:
DSSS and OFDM
This product meets ENERGY STAR® guidelines for energy
effi ciency. ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks. ENERGY STAR is a registered
mark owned by the U.S. government.
(BDP-S7200:US)
9-930-410-11
RMT-B126A/B127P/B127T/B128P
Photo: BDP-S7200
Remote : RMT-B126A
SPECIFICATIONS
General
Power requirements:
Power consumption:
Network stanby :
Dimensions (approx.):
Mass (approx.):
Operating temperature:
Operating humidity:
Supplied accessories
Blu-ray Disc™ / DVD Player
Sony Corporation
Home Entertainment Business Group
BDP-S7200
Taiwan Region Model
220 – 240V AC, 50/60Hz (BDP-S7200:AEP,UK)
120V AC, 60Hz (BDP-S7200:US)
110 – 240V AC, 50/60Hz (BDP-S7200:SP,TH)
110V AC, 60Hz (BDP-S7200:TW)
16W
5.8 W (all wired/wireless network parts ON)(BDP-S7200:AEP,UK)
430mm × 210mm × 49mm
(14 1/4 in. × 7 7/8 in. × 1 3/4 in.)
(width/depth/height) incl. projecting parts
2.3 kg (5 lb 20 oz)
5ºC to 35ºC(41ºF to 95ºC)
25 % to 80 %
• High Speed HDMI cable (1) (BDP-S7200:SP,TH,TW only)
• Remote commander (remote) (1)
• Size AAA (R03) batteries (2)
Specifi cations and design are subject to change without notice.
Published by HESRDM-Manual Design Dept.
US Model
Singapore Model
Thailand Model
UK Model
Europe Model
2014D6900-1
© 2014.04

Advertisement

Table of Contents
loading

Summary of Contents for Sony BDP-S7200

  • Page 1 25 % to 80 % DSSS and OFDM Supplied accessories • High Speed HDMI cable (1) (BDP-S7200:SP,TH,TW only) This product meets ENERGY STAR® guidelines for energy • Remote commander (remote) (1) effi ciency. ENERGY STAR and the ENERGY STAR mark •...
  • Page 2 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE Unleaded solder is more viscous (sticky, less prone to flow) than REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY ordinary solder so use caution not to let solder bridges occur such DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU as on IC pins, etc.
  • Page 3: Table Of Contents

    BDP-S7200 TABLE OF CONTENTS Section. Title. Page. SERVICE NOTE 1-1. Test Disc ..................1-1 1-2. Drive Repairing ................. 1-15 1-2-1. Preparation................1-15 1-2-2. Checking Flow ~ Drive (BU) section ~ ........1-15 1-2-3. BU Check Flow [zz] ~ .............. 1-16 1-2-4.
  • Page 4: Service Note

    BDP-S7200 SECTION 1 SERVICE NOTE 1-1. TEST DISC Part No. Description Layer J-6090-199-A BLX-104 Single Layer J-6090-200-A BLX-204 Dual Layer J-2501-307-A CD (HLX-A1) J-2501-305-A HLX-513 Single Layer (NTSC) J-2501-306-A HLX-514 Dual Layer (NTSC) J-6090-077-A HLX-506 Single Layer (PAL) J-6090-078-A HLX-507 Dual Layer (PAL) 1-1-1.
  • Page 5: Drive Repairing

    BDP-S7200 1-2.DRIVE REPAIRING 1-2-1. Preparation • ESD Measures It is necessary to check the working space ESD condition before starting the Drive Part (BU) repairs The ESD-resistance of BD Laser is weaker than DVD/CD Laser To prevent ESD destruction, please make sure the working space and human ESD.
  • Page 6: Kem-480Aaa/C2Rp2 Packing Spec

    BDP-S7200 1-2-4. BU Repair Flow ~ Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement] Remove the defective BU from Loading The following cases need OP Data Write: Assy and also remove BU insulator (4pcs) (1) Replace BU (MB is original)
  • Page 7: Bu Data Decode Jig

    BDP-S7200 1-2-6 BU Data Decode Jig • JIG Name : BDPRdec.exe • Release : 2011.8.25 • Version : 3.0.0.0 • Software Contents BDPRdec.exe ; Software SavePath.ini ; Decoded fi le destination setting fi le (initial destination is C:\BuData.txt) TasmanBars.dll ; decode dll Uninst.exe ;...
  • Page 8: Loading For Service

    BDP-S7200 1-2-7 Loading For Service BDP 8G Loading Assy service parts consists from 2 parts. 1 Holder, Chuck Assy 2 Loading Assy Currently these parts are producing by 2 vendors. Please DO NOT COMBINE 1 and 2 (From different vendor)
  • Page 9 BDP-S7200 1-2-9 In case of BU assy replacement: 1. OP related data for new assy is controlled by BU factory 2. All of data is recorded into a barcode label 3. The label is put on the assy 4. Service parts will be followed 5.
  • Page 10 BDP-S7200 BDP BX620/S6200 2.0 DEVICE ID INFORMATION 2.1 Procedure to check “Device ID” 1. From XMB(home menu), select “Setup” 2.Select “System Setting” and press “ ENTER” key 3. Select “System Information” and push “ENTER” key. 4. Device ID is shown on the display. (figure 2.1) DEVICE ID : XX:XX: XX:XX: XX:XX <= 12 digit...
  • Page 11: Disassembly

    BDP-S7200 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2 REAR PANEL AND TRAY COVER ASSY (Page 2-1) 2-3 TOP PANEL, FR-1306 BOARD, FL-1306 BOARD AND WLAN MODULE (Page 2-2) 2-4 SWITCHING...
  • Page 12 BDP-S7200 2-3. TOP PANEL, FR-1306 BOARD, FL-1306 BOARD AND WLAN MODULE Si h Six hook and slide d lid Top Panel Flexible flat cable Ten screws (FIM-1004) +BV3(3-CR) FL-1306 Case Top Flexible flat cable (FIF-1001) (FIF 1001) FR 1306 FR-1306...
  • Page 13 BDP-S7200 2-5. MB-1302 BOARD Three screws +BV3(3-CR) Flexible flat cable (SPD-005) One screw +P 3X3 Flexible flat cable (OPT-1003) Flexible flat cable (LDG-001) Flexible flat cable (WIM-1001) One screw (+BV3(3-CR)Black) Flexible flat cable (FIM-1004) Harness (PM-1004) 2-6. BD DRIVE AND FOOT...
  • Page 14: Circuit Board Location

    BDP-S7200 2-7. CIRCUIT BOARDS LOCATION MB-1302 Board Switching Regulator FL-1306 Board FR-1306 Board WLAN Module 2-4E...
  • Page 15: Block Diagrams

    BDP-S7200 SECTION 3 BLOCK DIAGRAMS 3-1. FRAME HARNESS CN502 J601 SPDIF CN601 CN540 Ethernet FGND FGND COMMON COMMON CN1260 CN1101 SA_A- SA_A- SA_A+ SA_A+ SA_B- SA_B- SA_B+ SA_B+ THERMO THERMO VC_PD VC_PD B D L O A D I N G A S S Y...
  • Page 16: Overall Block Diagram

    BDP-S7200 3-2. OVERALL BLOCK DIAGRAM MB-1302 BOARD OVERALL Q602 CEC PULL-UP UNSW3-3V ISOLATING SWITCH CN540 LAN (100) FR-1306 BOARD CN502 VDOUT VDOUT VDATA Wifi VSTB, VCLK, VDIN VSTB, VCLK, LCDRD MODULE FL-1306 BOARD CN201 PS201 (AC IN) 3-3. POWER BLOCK DIAGRAM...
  • Page 17: Printed Wiring Boards

    BDP-S7200 SECTION 4 PRINTED WIRING BOARDS 4-1. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS : Uses unleaded solders. : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated) Caution: Pattern face side: Parts on the pattern face side seen from (SIDE B) the pattern face are indicated.
  • Page 18: Fl-1306 Board (Front Left) Printed Wiring Board

    4-2. FL-1306 BOARD (FRONT RIGHT) PRINTED WIRING BOARD BDP-S7200 • See page 2-4E for circuit boards location. - Ref. No.: FL-1306 board; 20,000 series - : Uses unleaded solder. FL-1306 BOARD (SIDE A ) CN101 FL-1306 BOARD (SIDE B)
  • Page 19: 1306 Board (Front Right) Printed Wiring Board

    BDP-S7200 4-3 . FR-1306 BOARD (FRONT RIGHT) PRINTED WIRING BOARD There are a few cases that the part isn’t mounted in this model is printed on this diagram. • See page 2-4E for circuit boards location. - Ref. No.: FR-1306 board; 20,000 series - : Uses unleaded solder.
  • Page 20: Mb-1302 Board(Main) Printed Wiring Board (Side A)

    BDP-S7200 4-4 . MB-1302 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) There are a few cases that the part isn’t mounted in this model is printed on this diagram. • See page 2-4E for circuit boards location. - - Ref. No.: MB-1302 board; 10,000 series - : Uses unleaded solder.
  • Page 21: Mb-1302 Board (Main) Printed Wiring Board (Side B)

    BDP-S7200 There are a few cases that the part isn’t mounted in this model is printed on this diagram. 4-4 . MB-1302 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) • See page 2-4E for circuit boards location. - - Ref. No.: MB-1302 board; 10,000 series - : Uses unleaded solder.
  • Page 22: Service Mode And Error Log List

    BDP-S7200 SECTION 5 SERVICE MODE AND ERROR LOG LIST...
  • Page 23 BDP-S7200...
  • Page 24 BDP-S7200...
  • Page 25 BDP-S7200...
  • Page 26 BDP-S7200...
  • Page 27 BDP-S7200...
  • Page 28 BDP-S7200...
  • Page 29 BDP-S7200...
  • Page 30 BDP-S7200...
  • Page 31 BDP-S7200 5-10...
  • Page 32 BDP-S7200 5-11...
  • Page 33 BDP-S7200 5-12...
  • Page 34 BDP-S7200 5-13...
  • Page 35 BDP-S7200 5-14...
  • Page 36 BDP-S7200 5-15...
  • Page 37 BDP-S7200 5-16...
  • Page 38 BDP-S7200 5-17...
  • Page 39 BDP-S7200 5-18...
  • Page 40 BDP-S7200 History 5-19...
  • Page 41: Troubleshooting

    BDP-S7200 SECTION 6 TROUBLESHOOTING 6.1 Main Flow ........................6-2 6.2 Power (System) Flow ....................... 6-3 6.3 Audio section fl owchart ....................6-4 6.4 Video section fl owchart-HDMI out .................. 6-5 6.5 FR-1306 Board fl owchart ....................6-6 6.6 Remote does not operate ....................6-8 6.7 Drive fl...
  • Page 42: Main Flow

    BDP-S7200 6-1. Main Flowchart Start (and return from each r LED Light up about 10s and Are the all er line r supply pp y turn o automa cally er o (9-3 normal ? (9 3 Check IC212, pin 4 (outpu must 3.3V...
  • Page 43: Power (System) Flow

    BDP-S7200 6-2. Power (System) Flow AC IN Check the output voltages from the power supply block. CN301 pin 1: +12V (UNSW12V) Check that the harness has been inserted CN301 pin 2: +12V (UNSW12V) properly. If there is no problem, replace the power supply block.
  • Page 44: Audio Section Flowchart

    BDP-S7200 6-3. Audio Section Flowchart Audio does not sound right? Video is output properly? To Video section flowchart To Main flowchart Is the drive operating properly? To Drive flowchart Is there AUDIO digital signal (SPDIF) input Replace the MB board...
  • Page 45 BDP-S7200 6-4. Video/HDMI Section Flowchart - HDMI out Reproduced Video does not appear right Power Check Is Power Supply supplied at IC101? To Power (System) Flowchart IC101 (#G26 : +3.3V) IC101 (#E26 : +1.2V) Power Check Is IC601 (#5 : +12V)?
  • Page 46 BDP-S7200 6-5. FR-1304 Board Flowchart Power key can’t Function Any pulse appear if bu on press FR board is NG at pin 12 ND701 Any CLK signal at pin 12 CN701 To main flowchart Any high (3.3V) to low (0V) signal...
  • Page 47: Remote Does Not Operate

    BDP-S7200 6-6. Remote Does Not Operate Check of +3.3V voltage at CN1002 pin 17? Check of +3.3V voltage at IC703 pin17? To Power supply flow chart (MB board) Check of +3.3V voltage at CN701 pin 17? Check FFC disconnected from...
  • Page 48 BDP-S7200 FL-1306 Board Flowchart...
  • Page 49: Drive Fl Owchart

    BDP-S7200 6-7. Drive fl owchart BLX-104 Check Drive Power Supply BDP-S6200/BX620 Check PS301, PS302 C888 Pin 1: 5V can play the BD-disc Replace PS when open C889 Pin 1: 12V Check / replace the FFC cable, then check Check the Optical Block Unit (BU) by...
  • Page 50: Ethernet/Wifi Fl Owchart

    BDP-S7200 6-8. Ethernet fl owchart START Cannot connect with the network, cannot update through the network Is the LAN cable plugged in properly? Plug in the LAN cable firmly Is the LED of the hub router lit? Is power supplied to the MB board?
  • Page 51: Usb (Front) Device Flow \ Usb (Rear) Device Flow

    BDP-S7200 6-9 USB (Front) Device Flow/USB (Rear) Device Flowchart USB device is not recognized Insert the USB device again. Is 5V present at CN201 (FR-1304) Is 5V present at IC501 Power supply IC310 (MB board - Is it recognized when the power is...
  • Page 52: Repair Parts List

    Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé. 7-1-1 CASE SECTION ns: not supplied Ref. No. Part No. Description Remark X-2589-328-1 PANEL ASSY, TOP BDP-S7200:Except US X-2589-425-1 PANEL ASSY, TOP BDP-S7200:US X-2589-329-1 TRAY ASSY, COVER...
  • Page 53: Main Chassis Section

    BDP-S7200 7-1-2. MAIN CHASSIS SECTION The components identifi ed by mark or dotted line with mark are critical for safety. Replace only with part number specifi ed. Les composants iden tifi és par une marque sont critiquens pour la sécurité.
  • Page 54: Bd Section

    BDP-S7200 7-1-3. BD SECTION The components identifi ed by mark or dotted Les composants iden tifi és par une marque sont critiquens pour la sécurité. line with mark are critical for safety. Ne les remplace r que par une pièce portant le Replace only with part number specifi...
  • Page 55: Accessories

    Replace only with part number specifi ed. numéro spécifi é. Ref. No. Part No. Description Remark 1-834-169-22 CORD, CONNECTION (HDMI CABLE) BDP-S7200:SP,TH,TW 1-492-834-11 REMOTE COMMANDER (RMT-B126A) BDP-S7200:US 1-492-833-11 REMOTE COMMANDER (RMT-B127P) BDP-S7200:AEP,SP,TH 1-492-832-11 REMOTE COMMANDER (RMT-B128P) BDP-S7200: UK 1-492-829-11 REMOTE COMMANDER (RMT-B127T) BDP-S7200:TW 7-4E...
  • Page 56 BDP-S7200 REVISION HISTORY Ver. Date Description of Revision 2014.04 9-5E...

This manual is also suitable for:

Rmt-b126aRmt-b127pRmt-b127tRmt-b128p

Table of Contents