Advertisement
GAMMa wave
Technical Product Information
March 2008
DELTA i-system
Pushbutton wave shutter UP 211
DELTA profil
Pushbutton wave shutter UP 211
DELTA style
Pushbutton wave shutter UP 211
Mounting of the Pushbutton wave shutter UP 211:
B1
B2
B3
Diagram B
B1
Shutter control insert sys
B2
Frame
B3
Pushbutton wave shutter UP 211
1) The shutter control insert sys is connected and
mounted within the flush-type box (see installation
instructions for shutter control insert sys).
2) Place the pushbutton wave shutter together with its
frame onto the shutter control insert sys.
Dismantling:
Remove the pushbutton wave shutter manually together
with its frame (Diagram C).
Diagram C
Caution: Cut-out frames have to be used to integrate the
pushbutton wave shutter into the DELTA profil range!
Technical Manual
Update: http://www.siemens.de/gamma
2.20.2.2/4
Dimension Diagram
Dimensions in mm
DELTA i-system
DELTA profil
DELTA style
Commissioning
The function of the insert located beneath the pushbut-
ton is ensured without further commissioning once the
pushbutton has been placed on it.
If further shutter control inserts sys are to be operated
via the remote control mode, radio control connections
must first be established between each insert. Shutter
control inserts sys which have to be connected must also
be equipped with a pushbutton wave shutter.
The connection of the pushbutton wave shutter with
other radio components is carried out by pressing the
pushbutton. To do so, the special function must be set
for the two devices which have to be connected with
each other. The operating state of the pushbutton and
the successful connection are displayed by the LED lo-
cated in the centre of the pushbutton.
Connection via radio control:
Connecting the pushbutton wave shutter I with a shutter
control insert sys II via radio control.
Pushbutton wave shutter UP 211, 7 pages
© Siemens AG 2008
Subject to change without prior notice
5WG3 211-2HB_1
5WG3 211-2AB_1
5WG3 211-2GB_1
A
B
C
D
55
55
24
13
65
65
25
14
68
68
27
16,
5
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O. Box 10 09 53, D-93009 Regensburg
Advertisement
