Advertisement
DELTA i-system
Pushbutton wave shutter UP 211
DELTA profil
Pushbutton wave shutter UP 211
DELTA style
Pushbutton wave shutter UP 211
Connections
• 10 pin bar (230V-PEI) for connection to the shutter
control insert sys
Mechanical specifications
• Housing: plastic
• Dimensions (L x W x D):
DELTA i-system
55x55x24mm (including spring)
DELTA profil
65x65x25mm (including spring)
DELTA style
68x68x27mm (including spring)
• Weight: approx. 35g
• Fire load: approx. 950kJ
• Mounting: placed on the shutter control inserts sys
Electrical safety
• Pollution degree (according to IEC 60664-1): 2
• Protection (according to EN 60529): IP 20
• Overvoltage category (according to IEC 60664-1): III
• Device complies with EN 60669-2-1 and IEC 60664-1
Electromagnetic compatibility
complies with EN 60669-2-1, EN 301489, EN 300220
Environmental specifications
• Climatic conditions: EN 50090-2-2
• Ambient operating temperature: - 5 ... + 45°C
• Storage temperature: - 25 ... + 70°C
• Relative humidity (non-condensing): 5% to 93%
Markings
• KNX / EIB
CE norm
complies with the EMC regulations (residential build-
ings), low voltage regulations and R&TTE regulations
Declaration of conformity
SIEMENS AG declares herewith that the pushbutton wave
shutter UP 211 comply with the basic requirements and
other relevant regulations of Directive 1999/5/EG.
The CE declaration can be inspected at:
SIEMENS AG
Siemensstraße 10
93055 Regensburg
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O. Box 10 09 53, D-93009 Regensburg
Installation Instructions
Caution:
• The device may be used for interior installations and in
dry rooms only.
• The installation of the device into metal walls has to be
avoided since through this the range of radio control is
reduced considerably.
• Occasionally the transmission range may be influenced
by structural conditions (e.g. reinforced concrete) or
electric / electronic sources of interference.
• A minimum distance of 0.5 m must be maintained
between the transmitter and the relevant receivers.
• Though the radio transmission is carried out in the safe
868 MHz range, disruptions to the radio transmission
cannot be excluded.
• The radio transmission is not suitable for security ap-
plications.
V
• The device must be mounted and commissioned by an
authorized electrician.
• The device may be mounted to switch and socket
combination box mounts if VDE-certified devices are
used exclusively.
• The device must not be opened.
• For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
Mounting
The pushbutton wave shutter is clipped onto the shutter
control insert sys together with its frame. The electrical
connection between the pushbutton and the shutter
control insert is thus established via the 230V-PEI.
Pushbutton wave shutter UP 211, 7 pages
© Siemens AG 2008
Subject to change without prior notice
Technical Product Information
DANGER
Update: http://www.siemens.de/gamma
GAMMa wave
March 2008
5WG3 211-2HB_1
5WG3 211-2AB_1
5WG3 211-2GB_1
Technical Manual
2.20.2.2/3
Advertisement
