Slope Identification Guide; Safety Rules And Information - Simplicity Cobalt Series Operator's Manual

Gasoline and its vapors are extremely flammable. Do not
smoke while operating or refueling. Do not add fuel while
engine is hot or running. Allow engine to cool for at least 3
minutes prior to adding fuel.
Do not add fuel indoors, in an enclosed trailer, garage, or any
other enclosed area that is not well ventilated. Gasoline spills
should be cleaned up promptly and before operation begins.
Gasoline should be stored only in sealed containers approved
for fuel.
Proper maintenance is critical to the safety and performance
of your unit. Keep the unit free of grass, leaves, and excess
oil. Be sure to perform the maintenance procedures listed in
this manual, especially periodically testing the safety system.
Enclosed Areas
Only operate this unit outdoors and away from unventilated
areas such as inside garages or enclosed trailers. The
engine emits poisonous carbon monoxide gas and prolonged
exposure in an enclosed area can result in serious injury or
death.

Slope Identification Guide

2
How to measure the slope of a lawn surface with a
smartphone or an angle finder tool:
6
WARNING
Do not operate on slopes greater than 15 degrees.
1. Use a straight edge at least two feet long (A, Figure 2). A
2x4 or a straight piece of metal works well.
2. Angle finder tools.
a. Use your smartphone: Many smartphones (B,
Figure 2) have an inclinometer (angle finder) located
under the compass application.
b. Use angle finder tools: Angle finder tools (C and D,
Figure 2) are available at local hardware stores or
online (also called inclinometer, protractor, angle
meter, or angle gauge). Dial type (C) or digital type
(D) work, others may not. Follow user instructions
with the angle finder tool.
3. Put the two feet long straight edge along the steepest part
of the lawn slope. Put the board up and down the slope.
4. Put the smartphone or angle finder tool on the straight
edge and read the angle in degrees. This is the slope of
your lawn.
Note: A paper gauge slope identification guide is
included in your product literature packet and is
also available to download from the manufacturer's
website (simplicitymfg.com).

Safety Rules and Information

Training
• Read, understand, and follow all instructions in the
manual and on the unit before starting. If the operator(s)
or mechanic(s) can not read English it is the owner's
responsibility to explain this material to them.
• Become familiar with the safe operation of the equipment,
operator controls, and safety signs.
• All operators and mechanics should be trained. The
owner is responsible for training the users.
• Only allow responsible adults, who are familiar with the
instructions, to operate the unit.
• Never let children or untrained people operate or service
the equipment. Local regulations may restrict the age of
the operator.
• The owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people or property.
• Data indicates that operators, age 60 years and above,
are involved in a large percentage of riding mower-related
injuries. These operators should evaluate their ability
to operate the riding mower safely enough to protect
themselves and others from serious injury.
Preparation
• Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Use only accessories and attachments approved
by the manufacturer.
simplicitymfg.com