Sony ICD ICD-UX300F Operating Instructions Manual page 93

• Refer to the operating instructions or the
help supplied with Dragon
NaturallySpeaking, as some parts of
training are the same as those required for
dictating directly to the computer using a
headset microphone.
• Even if you have already created a user
speech file with a headset microphone,
you should create a separate speech file
for the IC recorder to get better
recognition accuracy.
Tips on using the IC recorder
When transcribing messages recorded using
the IC recorder, the following tips will help
you obtain maximum recognition accuracy.
• Set "REC Mode" to "ST," "STSP,"
"STLP" or "SP" in the menu.
When creating a user speech file
(training), set "REC Mode" to the mode
you normally use for voice recognition
software.
• Set "Mic Sensitivity" to "Low
the menu.
• Hold the IC recorder firmly and start
recording.
Hold the IC recorder so that the
microphone is about an inch (2 cm -
3 cm) from the corner of your mouth, not
directly in front of it. This minimizes the
sound of your breath in the recordings,
enabling maximum recognition accuracy.
P Note
Avoid recording in a noisy place, such as on a
subway platform, in order to obtain maximum
recognition accuracy.
" in
93 GB