Sony ICD ICD-UX300F Operating Instructions Manual page 107

Sony ic recorder operating instructions
Hide thumbs Also See for ICD ICD-UX300F:
Table of Contents

Advertisement

Symptom
The VOR function does not
work.
You cannot divide a
message.
When recording from other
equipment, the input level is
too strong or not strong
enough.
Playback speed is too fast or
too slow.
"--:--" is displayed.
"--y--m--d" or "--:--" is
displayed on the REC Date
display.
Remedy
• The synchronized recording function is activated (page 37). Set
"SYNC REC" to "OFF" in the menu (page 82).
• During FM recording, the VOR function does not work.
• You need a certain amount of free space in the memory to divide a
message.
• If 99 messages have been recorded in a folder, you cannot divide a
message in that folder. 99 messages have been recorded in the
selected
folder. Erase some of the messages (page 26) or erase
all the messages after you store them on your computer.
• The synchronized recording function is activated (page 37). Set
"SYNC REC" to "OFF" in the menu (page 82).
• You may not be able to divide a message at the beginning or at the
end of the message because of system limitations.
• You cannot divide or move a message other than the one recorded
using the IC recorder (MP3/WMA/AAC-LC file transferred from
a computer).
• If you divide a message frequently, the unit may become unable to
divide the message further.
• Connect the headphone jack of other equipment to the
(microphone) jack of the IC recorder and adjust the volume
m
level on the piece of equipment connected to the IC recorder.
• The playback speed is adjusted in DPC. Slide the
CTRL)
switch to "OFF" or press
adjust the speed in DPC again (page 43).
• You have not set the clock (page 13).
• The date of recording will not be displayed if you recorded the
message when the clock was not set.
DPC (SPEED
or
on the control button to
v
V
107
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents