Table of Contents
Advertisement
2. Switch Management
To set up the Managed Switch, the user needs to configure the Managed Switch
for network management. The Managed Switch provides two management options:
Out-of-Band Management and In-Band Management.
Out-of-Band Management
Out-of-band management is the management through console interface. Generally,
the user will use out-of-band management for the initial switch configuration,
or when in-band management is not available.
In-Band Management
In-band management refers to the management by logging in to the Managed
Switch using Telnet or HTTP, or using SNMP management software to configure the
Managed Switch. In-band management enables the management of the Managed
Switch to attach some devices to the Switch. The following procedures are required
to enable in-band management:
1. Logon to console
2. Assign/Configure IP address
3. Create a remote login account
4. Enable HTTP or Telnet server on the Managed Switch
In case in-band management fails due to Managed Switch configuration changes,
out-of-band management can be used for configuring and managing the Managed
Switch.
The Managed Switch is shipped with Management Port IP
address 192.168.1.1/24 assigned and VLAN1 interface IP
address 192.168.0.254/24 assigned by default. User can assign
another IP address to the Managed Switch via the console inter-
Important
face to be able to remotely access the Managed Switch through
Telnet or HTTP.
4
Advertisement
Table of Contents
